Vapeciga Voopoo Drag 2 Mini Kit is dual mod 18650. Capable of 157 watts. It is available in 2 colors both have a silver frame, but the choice is sticker black carbon fiber sticker carbon fiber white or black and red. They said 0.025 to 0.03 at the end second player (the site of the 0025 mod chip sites that says 0.03)

Specifications from the manufacturer:

Power: 5-157W
Batteries (battery load balancing compatible with all brands) 2 x 18650
Size: 90 x 54 x 24 mm
Color: Black and white / black red
resistance to low-power mode: 0.05Ω
Low resistance mode TC: 0.05Ω
New features: super compensation mode and power mode.
TC MODE: SS, NI, TI, North Carolina, TCR, CCR

first impressions and features
When I came to this mod, I must say I was impressed. Appearance and quality of construction mod is not what you would expect from such a cheap device. She had a weight to it and feels sturdy. 510-pin fine and have constant resistance and stable output for me. the screen is fairly standard. As you can see in the DNA chip or mods smoant, etc. The menu system is a bit of a learning curve, but well-designed and easy to learn and remember. It has a curved fashion to full wattage where you can adjust your vaporizer in 1 second programmable on-chip or by software. You can also delete mode does not want, for example, I removed Ni and Ti-mode devices. Overall, the build quality, performance and features that you can not expect this to be as cheap mod. Can be expected to cost more than it does.

To me too he felt as keywords in an attempt to exaggerate the already good Voopoo Vinci RBA show new (aka do not need a marketing BS substance for sale, must sell) I tested the speed of fire, because I do not feel the need. This is not 2014, I can not remember the last time I use a mod that a delay of a fire in it. Meanwhile, rapid fire mods.

As I said, there is no need to talk, except mod delay, it will be a scam. I hope that the amendment is not a delay in the fire at this time. This is perfectly normal. If you want a fun little test to test the delayed entry (also known as reaction time) 58% of which is between 0.2 and 0.35 seconds, 10 times what the chip and still feel right. Here is a test you can take a reaction timer and here is the data that is the result of the response of your time!

Now that we have a way, let’s get into some of the data. watt performance mode this chip is very good. In less than 50 watts or less mod resistance is on the right death. At 100 watts in the worst case, the resistance of 0.01 ohm (most mods fighting) was only 7 watts lower. On the other resistance, no more than 4 watts. The test is 11 watts to 125 watts of 0.01 ohms, but not more than 7 resistance more than 0.52 ohm affect volt limit. mod no output is 157 watts and more. Peaking at 168 watts. It also offers a limit of 39 amps (both mod battery doubles) and the limit of 7158 volts (also one of the best battery mod doubles) In comparison with Therion 167 (dual mod 18650 with a limit of 167 watt one of the best chips and the most expensive on the market) is chip which topped out at 165 watts. A 0.13 ohm (I tested the low and resistance is easier to determine the output) to 125 watts and 14 watts to 100 watts to 12 watts lower. The overall performance in watts mode of travel is very similar to the DNA of 250 chips in a dual battery configuration. mod also take a reading of resistance is very stable and accurate. Solid pin 510 connection and outlet of the device that is flexible and coherent. Not much more you can ask for. Overall, this is a fantastic device watt way.

Here is a peak comparison also added in an accent color with SS line around the frame and the screen compared to the Voopoo Too Coils click in are all black matte can be seen that the resin is still great, but as you can see here on the side of the other

rincoe mechanical man mod leave a little brighter and enough bite and the right mix is ​​Eleaf istick brighter.

It is a difference that, in addition to things, is the same model that feeling is still there. The only difference is that I’ll remove the “fine painting me” and move it to the pros as “a good paint job”, but beyond that, there are more changes I release a piece 2 of platinum, but people want to figure out what the difference is so small writing. Thaks everyone to read

Using wire SS SS mode (TCR arrangement in 1400 fared even better wear) mod has done a great job. Output after the mild weather and uniform. It is protected dry and did throw a good job of sucking the juice before cutting. With the construction of the normal test (single room SS316 and SS316 double spaced) performance was fantastic. It feels a little on the low side hits about 20 degrees lowered.

 A coil fantasy I large single building during normal use, I found very good Vapeciga Voopoo Drag Software as the exit ramp is fast and smooth. Very nice vaporizer. A disadvantage is that the limit of 80 watts not achieve even the very low ohms. When you drop down .2ohm with great luxury watts coil was never more than 45 watts. It means the way there and take forever. Not much vaporizer. Still protected, but the lack of ways to do good in this situation.

Watt mode performance is one of the best ever tested individually. Very stable, very soft, very consistent and very accurate. Watt add curves to make a better choice than the precision mod without. excellent temperature control in most situations. build quality is excellent. The design is elegant and simple. I was very impressed with this device, in particular less than $ 50 price (as low as $ 40 Y) has one of the best values ​​in the vaping right alongside combat and Charon. VooPoo probably a terrible name, but they did a great mod and loss. This mod is really put IJOY, wismec, Smok, etc. Joyetech shame IMO. You can make a great show, great quality at an affordable price mod

manufacturing quality
performance mode Watts
Watt curve characteristics
Temperature performance mode (in most situations)
Appearance (simple and elegant design)
software suite to customize
Good menu system with lots of mod neighborhood
Less than 50 years for me, as low as $ 40 now
will not update the firmware for my
temperature control performance in certain situations (large rolls under .2ohms)

 The only reason that this would not change if only Voopoo Pnp Pod Kit get code a control coil temperature with a double below 0.2 ohms. Beyond this mod is almost a must for all fans and a great option for those who want to upgrade their mod mod or just new, overall,

As usual, Frei Anthony and I still hope you can say that you are doing the same thing and I see you at the next revision

Some future comments: Geekvape Mech Pro, Aspire Archon, Pharaoh RTA Aspire Cleito Kel, Kaos Erebus 25mm RTA Envii Terra Octo RTA iJoy Lux, Rasa Blazer 200, Dovpo Snape Fuchai Duo 3 Captain iJoy, the deposits of Cornelius 3ohm, Smoant Rabox, and much more . If you know the product you want to see me, do not hesitate to ask

You can buy here:Voopoo Coils

sourcemore thanks